1.25MW/2.5MWh 20 英尺集中式能量储存容器

INPBESS-1250 是一种集成了集中式逆变器架构的高能量密度解决方案。其直流侧采用液冷 628Ah 电池组,以最大限度地减少系统损耗,同时确保精确的温度控制,显著提高了系统的可靠性和稳定性。交流侧提供 690Vac 输出,并配备可选变压器,以满足不同现场应用的其他电压水平要求。该解决方案旨在无缝兼容多种场景 —— 包括峰值修剪、负载转移和频率调节,以及大规模微电网 —— 这种解决方案以其灵活性、稳定性和适应性而闻名。

分享

1.25MW/2.5MWh 20 英尺集中式能量储存容器
1.25MW/2.5MWh 20 英尺集中式能量储存容器
产品特性 产品拓扑

产品特性

01

这可以应用于 C&I 市场以及大型微电网市场。

02

Support multiple operation modes such as PQ/VF/VSG.

03

Flexible voltage level support.

04

Result in high efficiency with low consumption.

05

Strong ability to deal with power grid faults.

06

High protection level to adapt to more application scenarios.

产品拓扑

ModelINPBESS-1250
Power Configuration Parameters
BESS rated DC discharge ratio0.5P
BESS DC rated power(kW)1250kW
Rated power of AC output (kW)1250kW
Rated power of AC input (kW)1250kW
DC Side Parameters
Cell type and capacity(Ah)LFP628Ah
Rated capacity (kWh)2508kWh
Battery configuration1P52S×8×3
Voltage range (V)DC1165~1498V
AC Side Parameters
AC rated woltage (V)690V(-10%~10%)
(690V/400V Transformer as an option)
Rated frequency(Hz)50Hz(±5Hz)
Rated output current (A)1046A
Rated input current(A)1046A
Access methodThree-phase three-wire
With transformer three-phase four-wire as an
option)
On-grid/off-grid functionSupport
System Parameters
Operation temperature range(℃)-35℃~60℃(>45℃ derating)
Operation humidity range(%)0~95%RH
Fire Protection System(1)Smoke,temperature,CO three-in-one detection,
(2)Exhaust explosion-proof valve,(3)Aerosol fire
extinguisher,(4)Water spray fire protection.
Thermal Management SystemDC liquid cooling,AC air cooling
Protection gradeIP54
Anti-corosion gradeC4/C5(optional)
Altitude3000m(Full load)2000m(Full load)
Communication interfaceRS485、CAN、Ethernet,4G
Dimensions(W*D*H)6058×2438×2896mm
Weight  (t)about 40t

相关产品

产品展示

4MW~5MW集中式升压一体舱

4MW~5MW集中式升压一体舱

查看更多 + 4MW~5MW集中式升压一体舱

5MW组串式升压一体舱

本产品针对大型储能电站研发设计,采用16/24/28台215kWPCS并联构成,完美适配主流3.44MWh/5MWh/6MWh电池舱;模块本体IP66高防护等级,可搭配干变/油变组成一体机;高度集成,现场施工调试省时省力。

查看更多 + 5MW组串式升压一体舱